BS EN 12441-8 is a European standard and a part of the BS EN 12441 series that discusses the flame atomic absorption spectrometric method for zinc and zinc alloys. Zinc (Zn) is used to make several alloys due to its galvanizing and sacrificial properties.
BS EN 12441-8 specifies a flame atomic absorption spectrometric method for the determination of tin in secondary zinc. It is applicable to the products specified in EN 13283. It is suitable for the determination of tin contents (mass fractions) between 0,1 % and 1,0 %.
BS EN 12441-8 on flame atomic absorption spectrometric method applies to:
Flame atomic absorption spectrometry is a measurement of the absorption of electromagnetic radiation, emitted by an element at a determined wavelength, by an absorbent medium flame formed of atoms of the same element in the ground state. Each element absorbs radiation of specific wavelengths and the intensity of the radiation absorbed is proportional to the concentration of the said element.
BS EN 12441-8 provides you with the principle of flame atomic absorption spectrometric method in which a sample of the metal is dissolved in a mixture of hydrochloric acid and hydrogen peroxide. This helps you in detecting the metals and metalloids in environmental samples.
BS EN 12441-8 navigates you through the procedures like test portion, preparation of the test portion, preparation of the calibration solution and spectrometric measurements for detecting the tin in secondary zinc.
With obedience and compliance to BS EN 12441-8, you can efficiently conduct the flame atomic absorption spectrometric method for the zinc and zinc alloys.
EN 12441-8:2004