BS 6068-2.11 specifies a manual spectrometric method for the determination of ammonium in water.
The method described in BS 6068-2.11 is applicable to the analysis of potable water, and most raw and wastewaters. Application to excessively coloured or saline waters shall be preceded by distillation (see clause 10).
NOTE An automated spectrometric method for the determination of ammonium will form the subject of ISO 7150/2.
BS 6068-2.11 on the Physical, chemical, and biochemical methods are useful for:
Hypochlorite ions are generated in situ by the alkaline hydrolysis of N, N’-dichloro-1,3,5-triazine-2,4,6 (1H, 3H, 5H)-trione, sodium salt (sodium dichloroisocyanurate).
BS 6068-2.11 provides methods for characterizing water quality based on physical, chemical, and biochemical measures for determining the ammonium content using manual spectrometric method.
BS 6068-2.11 describes methods and procedures for determining the ammonium contentin raw water with manual spectrometric method.
BS 6068-2.11 provides you with apparatus, sampling, transport, storage, and preparation of test pieces, preparation of reagents and apparatus, pre-treatment of test pieces, test procedure, and much more.
The test methods and procedures provided by BS 6068-2.11 assist you in the determination of ammonium in water and ensure reducing the risk of severe health issues.
With obedience and compliance to BS 6068-2.11, you can enhance the efficacy of the water and manufacture a standardized product.