1 Scope
This document specifies the characteristics of the following types of dowel-type fasteners:
-
— nails;
-
— staples;
-
— screws;
-
—
dowels;
-
—
bolts with nuts.
This document covers dowel-type fasteners for structural use in load bearing timber structures only. This document
covers also the following additional intended uses of the screws:
-
— to fix roof or cladding elements to the timber structure, with or without insulation
layers; and
-
— as reinforcement inserted in timber or in a glue laminated timber element to improve
its resistance to compression perpendicular to the grain.
This document covers types of dowel-type fasteners, which are manufactured of either carbon steel or stainless steel
and which may be coated for the following purposes:
-
— corrosion protection (as Type 1 coating);
-
— lubrication, to facilitate insertion (as Type 2 coating);
-
— withdrawal enhancement and/or collation for nails and staples (adhesive and/or resin
coatings) (as Type 3 coating).
This document covers types of dowel-type fasteners, which are manufactured from materials and within the specifications
for their geometry related properties, only as they are specified for:
This document specifies also the assessment and verification of constancy of performance
(AVCP) procedures of these characteristics and includes provisions for marking of
dowel-type fasteners.
This document does not cover dowel-type fasteners treated with fire retardants to improve their fire performance, nor
does it cover glued-in rods.