ISO 16696-1 is the first part of multiple series that establishes the basic principles for component performance and minimum production requirements for cross-laminated timber (CLT). ISO 16696-1 is applicable to CLT products which are manufactured from solid-sawn timber or wood-based panels built up of at least three layers in which the grain of adjoining layers is at right angles to each other.
ISO 16696-1 provides CLT dimension tolerances; component requirements; performance criteria; production, testing and trademarking guidance; and minimum requirements for factory production control. This document is based on known species, species combination and/or wood-based panel structural performance and bondability.
NOTE- ISO 16696-1 doesn’t include how CLT is to be used and installed.
ISO 16696-1 on cross laminated timber is useful for:
ISO 16696-1 provides requirements of CLT to ensure high strength and the structural simplicity needed for cost-effective buildings, as well as a lighter environmental footprint than concrete or steel.
ISO 16696-1 helps users in quick installation, and leads to improved thermal performance and design versatility. It also helps to reduce wastage.
ISO 16696-1 enables the users to determine the combination or wood-based panel’s structural performance and bondability.
CLT qualified in accordance with the provisions of ISO 16696-1 are resistant to the effects of moisture on structural performance as can occur due to construction delays or other conditions of similar severity.
BSI recommends this version of standard for organisations operating in or with the UK. The ISO edition is available here if required.