National foreword

This British Standard is the UK implementation of EN 12350‑1:2019. It supersedes BS EN 12350‑1:2009, which is withdrawn.

The UK participation in its preparation was entrusted to Technical Committee B/517/1, Concrete production and testing.

A list of organizations represented on this committee can be obtained on request to its secretary.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2019.

This European Standard was approved by CEN on 29 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

European foreword

This document (EN 12350‑1:2019) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by SN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2019, and conflicting national standards shall be withdrawn at the latest by December 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights

This document supersedes EN 12350‑1:2009.

This standard is one of a series on testing concrete.

EN 12350, Testing fresh concrete, consists of the following parts:

Part 1: Sampling and common apparatus
Part 2: Slump test
Part 3: Vebe test
Part 4: Degree of compactability
Part 5: Flow table test
Part 6: Density
Part 7: Air content – Pressure methods
Part 8: Self-compacting concrete – Slump-flow test
Part 9: Self-compacting concrete – V-funnel test
Part 10: Self-compacting concrete – L-box test
Part 11: Self-compacting concrete – Sieve segregation test
Part 12: Self-compacting concrete – J-ring test

The following amendments have been made to the 2009 edition of this standard:

editorial revisions;
consolidation of common apparatus for fresh concrete testing (EN 12350 series) and for making specimens for strength tests (in EN 12390‑2);
guidance on sampling for consistence retention testing.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

1 Scope

This document specifies two procedures for sampling fresh concrete, by composite sampling and by spot sampling.

NOTE 1 The requirement for remixing the sample before tests on the fresh concrete, or before making test specimens, is included in the relevant standards.

When mixing and sampling concrete is done in a laboratory, different procedures may be required.

NOTE 2 In this case Clause 6, item g) applies.

Additionally, this standard lists common apparatus mentioned in two or more standards of EN 12350 series and EN 12390‑2.

2 Normative references

3 Terms and definitions

4 Apparatus

4.1 Common apparatus for fresh concrete testing and for making specimens for strength tests

4.2 Apparatus required for sampling of the concrete

5 Sampling

5.1 Sampling plan

5.2 Obtaining a composite sample

5.3 Obtaining a spot sample

5.4 Measuring the temperature of the sample

5.5 Transporting, handling and care of samples

6 Report of sampling

BS EN 12350-1:2019

Testing fresh concrete - Sampling and common apparatus

Current, Under Review

Published:

31 Jul 2019