National foreword

This British Standard is the official English language version of EN 13726‑2:2002.

The UK participation in its preparation was entrusted by Technical Committee CH/117, Medical textiles, to Subcommittee CH/117/1, Test methods for non-wovens for use in compresses, which has the responsibility to:

aid enquirers to understand the text;
present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this subcommittee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index", or by using the "Find" facility of the BSI Standards Electronic Catalogue.

A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.

Compliance with a British Standard does not of itself confer immunity from legal obligations.

This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 15 April 2002

This European Standard was approved by CEN on 22 February 2002.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

Foreword

This document EN 13726‑2:2002 has been prepared by Technical Committee CEN/TC 205 "Non-active medical devices", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the latest by September 2002.

This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).

EN 13726 will consist of the following parts under the general title Test methods for primary wound dressings:

Part 1:Aspects of absorbency
Part 2:Moisture vapour transmission rate of permeable film dressings
Part 3:Waterproofness
Part 4:Conformability
Part 5:Bacterial barrier properties
Part 6:Odour control

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Introduction

EN 13726 specifies test methods and does not contain performance requirements. Part 2 of this standard describes test methods for the determination of the moisture vapour transmission rate of permeable film dressings.

Test methods for other aspects of primary wound dressings are described in other parts of EN 13726.

1 Scope

Part 2 of EN 13726 describes test methods recommended for the evaluation of moisture vapour transmission rate of permeable film primary wound dressings.

2 Terms and definitions

3 Test methods for moisture vapour transmission rate (MVTR)

3.1 Test conditions

3.2 MVTR of a wound dressing when in contact with water vapour

3.3 MVTR of a wound dressing when in contact with liquid

BS EN 13726-2:2002

Test methods for primary wound dressings - Moisture vapour transmission rate of permeable film dressings

Published:

15 Apr 2002

Withdrawn:

21 Sep 2023