1.1 These test methods are suitable for testing the integrity of unitized loads and large cases and crates, but not individual drums or palletized drums, as well
as the ability of the contents to endure normal handling, using standard mechanical
handling equipment. Not all of the test methods are applicable to all products containers
and loads. These test methods are applicable to common means of material handling,
including pull pack, clamp truck, and spade lift-type handling equipment as follows:
1.1.1
Test Method A—Fork Truck Handling—For testing the ability of the shipping unit to withstand repeated handlings by this test method.
1.1.2
Test Method B—Spade Lift Test—For lifting by spade lift attachment to determine the ability of the handling flap of the case or shipping unit to withstand repeated lifting and handling by this test method.
1.1.3
Test Method C—Clamp Handling Test—For lifting by hydraulic clamp attachment, to determine the ability of the shipping unit to withstand squeeze clamp handling consisting of repeated side compression and lifting.
1.1.4
Test Method D—Push-Pull Handling Test—For testing the ability of a unitized load on a slip-sheet to withstand repeated handling by this test method.
1.1.5
Test Method E—Grabhook Test—For lifting by grabhooks to determine the ability of the shipping unit to withstand the horizontal pressures of grabhooks.
1.1.6
Test Method F—Sling Tests—For lifting by wire rope, cable, or woven fiber slings to determine the ability of
the shipping unit to withstand the compression of slings.