Foreword

This PAS was sponsored by the Construction Industry Council (CIC) on behalf of the Building Information Modelling (BIM) Task Group. Its development was facilitated by BSI Standards Limited and it was published under licence from The British Standards Institution. It came into effect on 31 July 2014.

Acknowledgement is given to the following organizations that were involved in the development of this PAS as members of the steering group:

• AEC3
• Atkins Limited
• BAM
• BSRIA
• CIC
• ECS Limited
• The Facilities Society
• FSI (FM Solutions) Limited
• Government Property Unit
• Graeme Tappenden Consulting
• Hitherwood Consulting
• The Institute of Asset Management
• National Grid
• Network Rail
• Parsons Brinckerhoff
• University of Greenwich

Acknowledgement is also given to the members of a wider review panel who were consulted in the development of this PAS.

The British Standards Institution retains ownership and copyright of this PAS. BSI Standards Limited as the publisher of the PAS reserves the right to withdraw or amend this PAS on receipt of authoritative advice that it is appropriate to do so. This PAS will be reviewed at intervals not exceeding two years, and any amendments arising from the review will be published as an amended PAS and publicized in Update Standards.

This PAS is not to be regarded as a British Standard. It will be withdrawn upon publication of its content in, or as, a British Standard.

The PAS process enables a specification to be rapidly developed in order to fulfil an immediate need in industry. A PAS can be considered for further development as a British Standard, or constitute part of the UK input into the development of a European or International Standard.

Relationship with other publications

This PAS builds on the existing code of practice for the collaborative production of architectural, engineering and construction information, defined within BS 1192:2007.

It is a companion document of, and refers heavily to PAS 1192‑2:2013, Specification for information management for the capital/delivery phase of construction projects using building information modelling.

It also refers heavily to the BS ISO 55000 series, Assetmanagement, PAS 55:2008, Asset management, and to existing facilities management standards BS 8210:2012 and BS 8587:2012. BS 8536:2010 and BS 8572:2011 have also been useful source documents in relation to facilities management.

Use of this document

It has been assumed in the preparation of this PAS that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced.

Information about this document

The start and finish of text introduced by Corrigendum No. 1 is indicated in the text by tags and .

Copyright is claimed on the wedge element of Figure 3. Copyright holders are Mark Bew and Mervyn Richards.

Copyright is also claimed on Figure 2, which has been repurposed for this publication from Figure 14 in PAS 1192‑2:2013. The copyright holder is Mervyn Richards.

Presentational conventions

The provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”.

Commentary, explanation and general informative material is presented in italic type, and does not constitute a normative element. The word “should” is used to express recommendations, the word “may” is used to express permissibility and the word “can” is used to express possibility, e.g. a consequence of an action or an event.

Spelling conforms to The Shorter Oxford English Dictionary. If a word has more than one spelling, the first spelling in the dictionary is used.

Contractual and legal considerations

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with this PAS cannot confer immunity from legal obligations.

PAS 1192-3:2014

Specification for information management for the operational phase of assets using building information modelling

Published:

31 Jul 2014

Withdrawn:

18 Aug 2020