BS EN 60684-3-100 to 105:2002

What is BS EN 60684-3-100 to 105 – Extruded PVC sleeving about? 

BS EN 60684-3-100 to 105 is one of the parts of the series on flexible insulating sleeving. BS EN 60684-3-100 to 105 is a European Standard that specifies individual types of sleeving.  
BS EN 60684-3-100 to 105 gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC.  
Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. 
Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage 

• Sheets 100 and 103 cover sleeving having a temperature range of 10 °C to 90 °C. 
• Sheets 101 and 104 cover sleeving having a temperature range of 10 °C to 105 °C. 
• Sheets 102 and 105 cover sleeving having a temperature range of 40 °C to 70 °C. 

These sleevings are normally available in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white, pink, turquoise and green/yellow. They are also available in a transparent, translucent and non-coloured form. 

Who is BS EN 60684-3-100 to 105 - Extruded PVC sleeving purposes for? 

BS EN 60684-3-100 to 105 on Extruded PVC sleeving is relevant to: 

• Manufacturers of electrical sleeving, electrical insulating materials, cable sheaths 
• Industries working with Polyvinyl chloride  
• Manufacturers of power cables, capacitors, transformers            
• Large equipment and machinery manufacturers   
• Manufacturers of electrical equipment  
• Manufacturers of electrical insulations        
• Electrical engineers    

Why should you use BS EN 60684-3-100 to 105 - Extruded PVC sleeving? 

BS EN 60684-3-100 to 105 gives six of the sheets comprising Part 3 as follows: 

• Sheet 100: Extruded PVC sleeving – General purpose grade – Bilateral tolerances 
• Sheet 101: Extruded PVC sleeving – High temperature grade – Bilateral tolerances 
• Sheet 102: Extruded PVC sleeving – Low temperature grade – Bilateral tolerances 
• Sheet 103: Extruded PVC sleeving – General purpose grade – Unilateral tolerances 
• Sheet 104: Extruded PVC sleeving – High temperature grade – Unilateral tolerances 
• Sheet 105: Extruded PVC sleeving – Low temperature grade – Unilateral tolerances  

Using BS EN 60684-3-100 to 105 best practice guidance, you will be able to gauge the appropriate requirements for extruded PVC sleeving. BS EN 60684-3-100 to 105  also helps users improve the quality and durability of products by helping them make the most suitable choice.