1.1.1
General
Replacement:
Replace the text, except the first paragraph, with the following new text:
This part of IEC 61010 provides particular safety requirements to equipment intended for in vitro diagnostic
(IVD) medical purposes, including self-test IVD medical purposes. It is intended to
be used in conjunction with the manufacturer’s risk management but not to replace it.
NOTE 1 A good design practice of an equipment starts from the beginning with a risk management process according to ISO 14971, which provides requirement and guidance for a comprehensive risk management process and identifies hazards and risks related with the equipment.
IVD medical equipment, whether used alone or in combination, is intended by the manufacturer
to be used in vitro for the examination of specimens, including blood and tissue samples,
derived from the human body, solely or principally for the purpose of providing information
concerning one or more of the following:
-
• a physiological or pathological state; or
-
• a congenital abnormality;
-
• the determination of safety and compatibility with potential recipients;
-
• the monitoring of therapeutic measures.
Self-test IVD medical equipment is intended by the manufacturer for use by lay persons
in a home environment.
NOTE 2 A system, as specified by its manufacturer, is a combination of items of equipment,
at least one of these is interconnected to another item. In the following text the
term equipment is used for single equipment and systems.
It is possible that all or part of the equipment falls within the scope of one or
more other Part 2 standards of IEC 61010 as well as within the scope of this document. In that case, the requirements of those
other Part 2 standards will also apply.