BS EN 16203 is a European Standard on the safety of industrial trucks. The main aim of BS EN 16203 is to provide a procedure for verifying the lateral stability of the truck while travelling to assess how a component or subsystem influences the overall vehicle ride, handling, and performance.
BS EN 16203 specifies dynamic tests for the verification of lateral stability for counterbalanced lift trucks according to EN ISO 3691-1 that have a centre control, sit down, non-elevating operator, with a rated capacity up to and including 5 000 kg when travelling on smooth level ground with the forks in travelling position.
The requirements are specific to the various drive systems (e.g., Electric-/Internal-Combustion-Engine trucks), taking into account their varying influence on dynamic stability performance.
Risks due to lifting or manoeuvring operations are covered by the respective stability tests.
Note 1: BS EN 16203 is not applicable for Rough Terrain forklift trucks.
Note 2: BS EN 16203 does not cover the risk of a lateral tip over associated with driving backwards.
Note 3: Risks due to falling off a loading dock or turning on a ramp are not covered by BS EN 16203.
BS EN 16203 on dynamic tests for lateral stability for counterbalanced lift trucks is useful for:
Counterbalance lift trucks are the most common type of truck with units designed and engineered to safely lift a wide range of weights.
Lateral stability is a truck’s resistance to overturning sideways. The truck is designed so that when travelling, laden or unladen, it will remain stable while being operated on the smooth level ground under conditions of use defined by the manufacturer, e.g., by controlling travelling velocity, steering rate of change, acceleration and deceleration, the position of load handling device.
To reduce the risk of lateral instability for lifting, furthermore, it is proposed to indicate the misuse of driving with elevated load by signals or by reduction of the driving velocity when exceeding a certain lift height.
BS EN 16203 provides the test equipment and test procedure as well as covers the testing of trucks, verification and documentation.
As a result, if you are an industrial truck manufacturer, complying with BS EN 16203 can assist you design counterbalanced trucks in order to carry a capacity load at a standard load centre and improve truck safety under limited working conditions.
EN 16203:2014