BS EN 62005-2 is the second part of a multi-series standard used for the Reliability of fibre optic interconnecting devices and passive components.
BS EN 62005-2 provides a basis for defining reliability tests for fibre optic interconnecting devices and passive components. It provides advice on life testing procedures, the calculation of failure rates and the presentation of results. In addition to such general guidance, a worked example illustrates the method of calculating the instantaneous failure rate for a device during its service lifetime, based on accelerated life tests.
BS EN 62005-2 on Reliability tests for fibre optic interconnecting devices and passive components is useful for:
Fibre optics is the technology used in transmitting information of light through strands of fibre. This strand of fibre is made up of glass or plastic for long distances.
BS EN 62005-2 can be your best guide in conducting the test method for wear-out failures. This test method helps in calculating the failure distribution, median time to failure, temperature acceleration factor, and humidity acceleration factor, and also helps in calculating the failure rate of these devices. The life test matrix test is useful in measuring the values of relative humidity at different temperatures and at absolute humidity levels.
By applying BS EN 62005-2, you can ensure the reliability and sustainability of these devices in different climatic conditions. This helps in avoiding the defects and failures which result in manufacturing good quality fibre optic interconnecting devices and passive components.
EN 62005-2:2001
IEC 62005-2:2001