1 Scope

This document describes the specific ‘Design for PRM use’ requirements applying to rolling stock and the assessment of those requirements. The following applies to this document:

• The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.

• This document defines elements which are universally valid for obstacle-free travelling relating to toilets. The definitions and requirements of this document are to be used for rolling stock applications.

• This document only refers to aspects of accessibility for PRM passengers; it does not define non-PRM related requirements and definitions.

• This document assumes that the rolling stock is in its defined operating condition.

• Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.

The 'Equipment and Components' standard is written in three parts:

• this document is Part 1 and contains:

  • toilets.

• Part 2 contains:

  • handholds;

  • seats;

  • wheelchair spaces.

• Part 3 contains:

  • clearways;

  • internal doors.