National foreword

This British Standard is the UK implementation of EN ISO 7093‑1:2000. It is identical to ISO 7093‑1:2000. Together with BS EN ISO 7091:2000, BS EN ISO 7092:2000, BS EN ISO 7093‑2:2000, BS EN ISO 7094:2000 and BS EN ISO 898‑3:2018+A1:2021, it supersedes BS 4320:1968, which is withdrawn.

The UK participation in its preparation was entrusted to Technical Committee FME/9/3, Springs.

A list of organizations represented on this committee can be obtained on request to its secretary.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 September 2001.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this part of ISO 7093 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

International Standard ISO 7093‑1 was prepared by Technical Committee ISO/TC 2, Fasteners.

This first edition of ISO 7093‑1, together with ISO 7093‑2, cancels and replaces ISO 7093:1983, which has been technically revised.

ISO 7093 consists of the following parts, under the general title Plain washers — Large series:

Part 1: Product grade A
Part 2: Product grade C

This European Standard was approved by CEN on 1 June 2000.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

Foreword

The text of the International Standard ISO 7093‑1:2000 has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2000, and conflicting national standards shall be withdrawn at the latest by December 2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Endorsement notice

The text of the International Standard ISO 7093‑1:2000 was approved by CEN as a European Standard without any modification.

NOTE Normative references to International Standards are listed in annex ZA (normative).

1 Scope

This part of ISO 7093 specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive.

Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked.

Washers of hardness class 200 HV are suitable for

hexagon bolts and screws of product grades A and B in property classes up to and including 8.8;
hexagon nuts of product grades A and B in property classes up to and including 8;
hexagon bolts, screws and nuts of stainless steel of similar chemical composition;
case-hardened thread rolling screws.

Washers of hardness class 300 HV are suitable for

hexagon bolts and screws of product grades A and B in property classes up to and including 10.9;
hexagon nuts of product grades A and B in property classes up to and including 10.

If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.

2 Normative references

3 Dimensions

4 Requirements and International Standards of reference

5 Designation

BS EN ISO 7093-1:2000

Plain washers. Large series - Product grade A

Current

Published:

30 Jun 2021