NOTE 1 The working ranges in Table 1 are those for which the method has been shown to be satisfactory, and are offered for guidance. However, there is no reason why wider ranges should not be used, provided that the successful measurement of such wider ranges has been demonstrated.

NOTE 2 Hydrocarbons above n-pentane are expressed as the “pseudo-component” C₆+ which is measured as one composite peak and calibrated as such. The properties of C₆+ are calculated from an extended analysis of the individual C₆ and higher hydrocarbons.

NOTE 3 Oxygen is not a normal constituent of natural gas and would not be expected to be present in gas sampled to an online instrument. If any oxygen is present as a result of air contamination, it will be measured with the nitrogen. The resulting measured (nitrogen + oxygen) value will be in error to a small extent because of the slight difference between the detector responses of oxygen and nitrogen.

NOTE 4 The helium and argon contents are assumed to be sufficiently small and unvarying that they need not be analysed for.

NOTE 5 The gas sample shall not contain any hydrocarbon condensate and/or water.