BS EN 50288 is a series on multi-element metallic cables used in analogue and digital communication and control. Multi-element metallic cable is commonly formed by drawing the metal through a hole in a die or draw plate. BS EN 50288-6-1 is a sectional specification for unscreened cables, characterised from 1 MHz up to 250 MHz, to be used in horizontal and building backbone wiring as defined in EN 50173.
This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics of the cables when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems.
Note: These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.
BS EN 50288-6-1 on multi-element metallic cables used in analogue and digital communication and control is useful for:
Multi-element metallic cables are used to bear mechanical loads, often in the form of wire rope. In electricity and telecommunication signals, a multi-element metallic cable can refer to an electrical cable, which can contain a "solid core" of a single wire or separate strands in stranded or braided forms. BS EN 50288-6-1 is a Blank Detail Specification for un-screened cables characterised from 1 MHz up to 250 MHz, for industrial or environmental demanding areas for horizontal and building backbone wiring applications for information technology generic cabling systems.
BS EN 50288-6-1 describes detailed specifications on the Name and address of the organisation that has prepared the document, EN document number, issue number and date of issue, Address of the organisation from which the document is available, Related documents, Any other reference to the cable, national reference, trade name, etc., A complete description of the cable which shall include, Type and number of elements, Nominal impedance, Screening, Application, Category, found in EN 50173 and Other distinguishing performance characteristics. Using BS EN 50288-6-1 you can understand unscreened cables, characterised from 1 MHz up to 250 MHz, to be used in horizontal and building backbone wiring as defined in EN 50173.
BS EN 50288-6-1:2013 supersedes BS EN 50288-6-1:2003. BS EN 50288-6-1:2013 includes some technical changes with respect to BS EN 50288-6-1:2003. These include:
EN 50288-6-1:2013
EN IEC 63033-2:2019