1 Scope
This document provides a method to calculate the GHG emissions from an LNG liquefaction plant, onshore or offshore.
The frame of this document ranges from the inlet flange of the LNG plant’s inlet facilities up to and including the offloading arms to truck, ship or railcar loading. The upstream
supply of gas up to the inlet flange of the inlet facilities and the distribution of LNG downstream of the loading arms are only covered in general
terms.
This document covers:
-
— all facilities associated with producing LNG, including reception facilities, condensate unit (where applicable), pre-treatment units (including but not limited
to acid gas removal, dehydration, mercury removal, heavies removal), LPG extraction
and fractionation (where applicable), liquefaction, LNG storage and loading, Boil-Off-Gas
handling, flare and disposal systems, imported electricity or on-site power generation
and other plant utilities and infrastructure (e.g. marine and transportation facilities).
-
— natural gas liquefaction facilities associated with producing other products (e.g. domestic gas, condensate, LPG, sulphur,
power export) to the extent required to allocate GHG emissions to the different products.
-
— all GHG emissions associated with producing LNG. These emissions spread across scope 1, scope 2 and scope 3 of the responsible organization. Scope 1, 2 and 3 are defined in this document. All emissions sources are covered including
flaring, combustion, cold vents, process vents, fugitive leaks and emissions associated
with imported energy.
The LNG plant is considered “under operation”, including emissions associated with
initial start-up, maintenance, turnaround and restarts after maintenance or upset.
The construction, commissioning, extension and decommissioning phases are excluded
from this document but can be assessed separately.
The emissions resulting from boil-off gas management during loading of the ship or
any export vehicle are covered by this document. The emissions from a ship at berth,
e.g. mast venting are not covered by this document.
This document describes the allocation of GHG emissions to LNG and other hydrocarbon products where other products are produced
(e.g. LPG, domestic gas, condensates, sulphur, etc.).
This document defines preferred units of measurement and necessary conversions.
This document also recommends instrumentation and estimations methods to monitor and
report GHG emissions. Some emissions are measured and some are estimated.
This document is applicable to the LNG industry.
Applications include the provision of method to calculate GHG emissions through a standardized and auditable method, a means to determine their
carbon footprint.