1 Scope
This document specifies the requirements and/or measures to eliminate the hazards
or reduce the risks in the following groups of stationary grinding machines which
are designed primarily to shape metal by grinding:
-
— Group 1: manually controlled grinding machines without power operated axes and without
numerical control;
-
— Group 2: manually controlled grinding machines with power operated axes and limited
numerically controlled capability, if applicable;
-
— Group 3: numerically controlled grinding machines.
NOTE 1 For detailed information on the groups of grinding machines, see 3.1 and 3.2.
NOTE 2 Requirements in this document are, in general, applicable to all groups of grinding
machines. If requirements are applicable to some special group(s) of grinding machines
only, then the special group(s) of grinding machine(s) is/are specified.
This document covers the significant hazards listed in Clause 4 and applies to ancillary devices (e.g. for workpieces, tools, workpiece holding devices
and handling devices), which are integral to the machine.
This document also applies to machines which are integrated into an automatic production
line or grinding cell in as much as the hazards and risks arising are comparable to
those of machines working separately.
This document also includes in Clause 7 a minimum list of safety-relevant information which the manufacturer has to provide
to the user. See also ISO 12100:2010, Figure 2, which illustrates the interaction of the manufacturer’s and user’s responsibility
for the operational safety.
The user's responsibility to identify specific hazards (e.g. fire and explosion) and
reduce the associated risks can be critical (e.g. whether the central extraction system
is working correctly).
Where additional metalworking processes (e.g. milling, turning, laser processing)
are involved, this document can be taken as a basis for safety requirements. Specific
information on hazards arising from other metalworking processes are covered by other
International Standards.
This document applies to machines that are manufactured after the date of issue of
this document.
This document does not apply to stationary honing, polishing and belt grinding machines.
This document does not apply to transportable motor-operated electric tools in accordance
with IEC 61029-2-4 and IEC 61029-2-10.