1 Scope
This document:
-
— specifies minimum requirements for materials, design, construction, prototype testing
and routine manufacturing inspections of fully wrapped composite cylinders with a
water capacity from 0,5 litre up to and including 150 litres for liquefied petroleum
gases (LPG) exposed to ambient temperatures, with a test pressure of at least 30 bar;
-
— is only applicable to cylinders which are fitted with a pressure relief valve (see
4.1.3);
-
— is applicable to cylinders with a liner of metallic material (welded or seamless)
or non-metallic material (or a mixture thereof), reinforced by fibres of glass, carbon
or aramid (or a mixture thereof);
-
— is also applicable to composite cylinders without liners.
Cylinders manufactured to this document are suitable for temperatures down to −40 °C.
This document does not address the design, fitting and performance of removable protective
sleeves. Where these are fitted, the choice of material and sleeve performance are
expected to be considered separately.