National foreword

This British Standard is the official English language version of EN 14188‑2:2004.

The UK participation in its preparation was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/3, Materials for concrete roads, which has the responsibility to:

aid enquirers to understand the text;
present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this subcommittee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with a British Standard does not of itself confer immunity from legal obligations.

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover.

The BSI copyright notice displayed in this document indicates when the document was last issued.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 12 January 2005

This European Standard was approved by CEN on 4 November 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Foreword

This document (EN 14188‑2:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005.

This document is one of a series of standards as listed below.

EN 14188‑1, Joint fillers and sealants — Part 1: Specifications for hot applied sealants.

EN 14188‑2, Joint fillers and sealants — Part 2: Specifications for cold applied sealants.

prEN 14188‑3, Joint fillers and sealants — Part 3: Specifications for preformed joint seals.

This document includes a Bibliography.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

1 Scope

This document specifies the requirements for cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, parking decks, bridge decks, airfields and other trafficked areas.

This document does not cover the use in gasoline stations, jet fuel stations on airfields and the chemical industry.

2 Normative references

3 Terms and definitions

4 Classification and specification

4.1 Cold applied sealant

4.2 Primer

5 Requirements

5.1 General

5.2 Extrudability

5.3 Rate of cure

5.4 Tack free time

5.5 Self levelling properties

5.6 Resistance to flow

5.7 Loss of volume

5.8 Change in mass and volume after immersion in liquid chemicals

5.9 Resistance to hydrolysis

5.10 Cohesion

5.11 Bonding strength

5.12 Adhesion/cohesion properties at maintained extension after immersion in liquid chemicals

5.13 Resistance to UV-ageing

5.14 Elastic recovery

5.15 Resistance to flame

5.16 Dangerous substances

6 Evaluation of conformity

6.1 General

6.2 Type Testing

6.3 Factory Production Control (FPC)

7 Marking, labelling and packaging

7.1 General

7.2 Cold applied joint sealant

7.3 Primer

7.4 Containers

BS EN 14188-2:2004

Joint fillers and sealants - Specifications for cold applied sealants

Current

Published:

12 Jan 2005