Standard
Withdrawn
BS EN 61784-1:2010
Industrial communication networks. Profiles - Fieldbus profiles
Published:
Withdrawn:
1 Scope
This part of IEC 61784 defines a set of protocol specific communication profiles based primarily on the
IEC 61158 series, to be used in the design of devices involved in communications in factory
manufacturing and process control.
Each profile selects specifications for the communications protocol stack at a device.
It contains a minimal set of required services at the application layer and specification
of options in intermediate layers defined through references. If no application layer
is included, then a minimal set of required services at the Data-link layer is specified.
The appropriate references to the protocol specific types are given in each communication
profile family or associated profiles.
NOTE All profiles are based on standards or draft standards or International Standards published by the IEC or from standards or International Standards established by other standards bodies or open standards processes.
The structure of communication profile families is specified in Figure 1.
Each profile selects an appropriate consistent and compatible subset of services and
protocols from the total available set that is defined and modeled in IEC 61158. For the selected subset of services and protocols, the profile also describes any
possible or necessary constrains in parameter values.
Table 1 shows the communication profile families that are defined in this standard.
Table 1
—
Relations of Communication Profile Families to type numbers
|
IEC 61784-1 contents
|
Corresponding IEC 61158 Types
|
|||
|---|---|---|---|---|
|
CPF
|
Clause
|
Communication Profile Families (Note 1)
|
Type
|
|
| 1 | 5 | FOUNDATION® Fieldbus | 1, 5, 9 | (see Note 2) |
| 2 | 6 | CIP™ | 2 | |
| 3 | 7 | PROFIBUS & PROFINET | 3, 10 | (see Note 3) |
| 4 | 8 | P-NET® | 4 | |
| 5 | 9 | WorldFIP® | 7 | |
| 6 | 10 | INTERBUS® | 8 | |
| 7 | 11 | Has been removed based for lack of market relevance | 6 | |
| 8 | 12 | CC-Link | 18 | |
| 9 | 13 | HART | 20 | |
| 16 | 14 | SERCOS | 16 | |
NOTE 1 See the specific CPF clauses for information on the respective trademark holders.
NOTE 2 CP 1/1 has a denigrated PhL device profile subclass, which uses a variant of a Type 3 PhL.
NOTE 3 CP 3/2 has a denigrated PhL device profile subclass, which uses a variant of a Type 1 PhL.
NOTE 4 Other CPFs can be found in IEC 61784‑2.
Product Details
Descriptors
Data transfer
Data processing
Bus networks
Computer applications
Fieldbus
Open systems interconnection
Data link layer (OSI)
Interfaces (data processing)
Industrial
Computerized control
Computer networks
Automatic control systems
Communication networks
Data transmission
Process control
Design
ICS Codes
35.100.20 Data link layer
35.240.50 IT applications in industry
Committee
GEL/65/3
International relationships
Identical to:EN 61784-1:2010
IEC 61784-1:2010
ISBN
978 0 580 66760 2
Publisher
BSI