This part of the IEC 60153 specifies straight hollow metallic tubing of ordinary rectangular cross-section for use as waveguides in radio frequency electrical applications. The principal cross-section for such tubing is shown in Figure 1 together with its defining geometrical dimensions.
NOTE This document serves to define tubular semi-finished products that are characterised by specifying both their inside and outside dimensions. However, in the case of particularly large and particularly small waveguides, this document only specifies inside dimensions. This is for production-related reasons.
The term "ordinary rectangular waveguide" in the title of this document refers to rectangular waveguides with a b-to-a ratio of 0,5 (or slightly less).
The objective of this document is to specify for hollow metallic waveguides:
the details necessary to ensure compatibility and, as far as is essential, interchangeability;
test methods;
uniform requirements for the electrical and mechanical properties.
This document does not contain any binding specifications for the materials to be used, but merely examples. The exact selection of materials is subject to agreement between the customer and the supplier.
IEC 60153-2 Ed.4.0
EN 60153-2 Ed.4.0