BS CECC 265001 is an international standard used for Harmonized system of quality assessment for electronic components. This helps in manufacturing good quality Film and hybrid integrated circuits used in electronic components.
BS CECC 265001 specifies the terms, definitions, symbols, quality system, test, assessment and verification methods, and other requirements relevant to the design, manufacture, and supply of Film & Hybrid Integrated Circuits in compliance with the general requirements of the CECC System for electronic components of assessed quality. It should be read in conjunction with EN 165000-1 — Generic Specification, which contains details on the test methods referenced herein.
Note 1: The Self-Audit Checklist of EN 165000-3 is required to be completed and verified by the ONS prior to the commencement of Technology Approval.
Note 2: Where specified, the manufacturer shall include the requirements of this TAS in his TADD, refer to Annex B.
BS CECC 265001 on Film and hybrid integrated circuits is useful for:
Integrated circuits are a set of electronic circuits on one small flat piece of semiconductor materials, usually silicon.
BS CECC 265001 specifies the test method and test procedure for these film and hybrid integrated circuits. The circuit designs specified are useful in constructing circuits that are used in this integrated circuit. BS CECC 265001 specifies the manufacturing process for producing the thick or thin-film substrates which are used in integrated circuits. With the help of the verification process, you can avoid the defects and failures in these Film and hybrid integrated circuits. This also helps in identifying the process characterisation of these circuits.
By applying BS CECC 265001, you can standardize the manufacturing process which results in producing good quality Film and hybrid integrated circuits used in electronic components.