National foreword

This British Standard is the UK implementation of EN ISO 10286:2025. It is identical to ISO 10286:2025. It supersedes BS EN ISO 10286:2021, which is withdrawn.

The UK participation in its preparation was entrusted to Technical Committee PVE/3, Gas containers.

A list of organizations represented on this committee can be obtained on request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2025.

This European Standard was approved by CEN on 30 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.

European foreword

This document (EN ISO 10286:2025) has been prepared by Technical Committee ISO/TC 58 "Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2026, and conflicting national standards shall be withdrawn at the latest by February 2026.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 10286:2021.

Any feedback and questions on this document should be directed to the users’ national standards body/national committee. A complete listing of these bodies can be found on the CEN website.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.

Endorsement notice

The text of ISO 10286:2025 has been approved by CEN as EN ISO 10286:2025 without any modification.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 23, Transportable gas cylinders, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This sixth edition cancels and replaces the fifth edition (ISO 10286:2021), which has been technically revised.

The main changes are as follows:

introduction of several new terms and definitions throughout Clause 3;
correction of definitions throughout Clause 3;
removal of some terms and definitions in Clause 3;
addition to Annex B of both the terms introduced in Clause 3 and of additional terms where no definition were given but the correct translation into French and German are given.

In addition to text written in the official ISO languages (English, French), this document gives text in German. This text is published under the responsibility of the Member Body for Germany (DIN) and is given for information only. Only the text given in the official languages can be considered as ISO text.

Any feedback or questions on this document should be directed to the user’s national standards body. A complete listing of these bodies can be found at www.iso.org/members.html.

Introduction

The terms and definitions in this document are given in the following layout:

The terms in this document are sorted in systematic order as far as possible. Further guidance on terminological presentation can be found in ISO 10241‑1.

The definitions support the understanding of the terms used in this document. They have been prepared with due regard to possible uses in different fields related to gas cylinders. However, it is possible that they will require adaption for particular uses.

Within this document, the term “ADR” is for simplification used as to also include similar regulations such as RID and ADN, where appropriate.

Table 1 shows a hierarchical overview of pressure receptacles according to the UN Model Regulations.

Annex A shows the different pressures for pressure receptacles in relation to each other.

Annex B shows a table giving both the terms of clause 3 as well as terms for additional terminology including the translation to the other two languages of this three-language document.

Annex C shows figures related to the additional terminology given in Annex B.

Terms given in square brackets are not within the scope of this document. They are shown for information only.

Unless noted by exception, the use of the word “cylinder” in this document refers to cylinders as well as tubes and pressure drums.

In International Standards, weight is equivalent to a force, expressed in Newton. However, in common parlance (as used in terms defined in this document), the word “weight” continues to be used to mean “mass”, even though this practice is deprecated (ISO 80000-4).

1 Scope

This document defines terms for the manufacture and use of gas cylinders and other pressure receptacles and their fittings.

2 Normative references

3 Terms and definitions

3.1 Terms related to pressure receptacles

3.2 Terms related to accessories

3.3 Terms related to manufacture

3.4 Terms related to testing and inspection

3.5 Terms related to characteristics, properties and pressures

3.6 Terms related to material

Bibliography

BS EN ISO 10286:2025

Gas cylinders. Vocabulary

Current

Published:

31 Aug 2025

1 Scope