National foreword

This British Standard is the UK implementation of EN ISO 22000:2018+A1:2024. It is identical to ISO 22000:2018, incorporating amendment 1:2024. It supersedes BS EN ISO 22000:2018, which is withdrawn.

The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by .

The UK participation in its preparation was entrusted to Technical Committee AW/90, Quality systems for the food industry.

A list of organizations represented on this committee can be obtained on request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.

This European Standard was approved by CEN on 26 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

European foreword

This document (EN ISO 22000:2018) has been prepared by Technical Committee ISO/TC 34 "Food products".

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2018, and conflicting national standards shall be withdrawn at the latest by December 2018.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 22000:2005.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 22000:2018 has been approved by CEN as EN ISO 22000:2018 without any modification.

European foreword to Amendment 1

The text of ISO 22000:2018/Amd 1:2024 has been prepared by Technical Committee ISO/TC 34 "Food products” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 22000:2018/A1:2024 by CCMC.

This Amendment to the European Standard EN ISO 22000:2018 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall be withdrawn at the latest by March 2025.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national standards body. A complete listing of these bodies can be found on the CEN website.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.

Endorsement notice

The text of ISO 22000:2018/Amd 1:2024 has been approved by CEN as EN ISO 22000:2018/A1:2024 without any modification.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see http://www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see http://www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see http://www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 17, Management systems for food safety.

Any feedback or questions on this document should be directed to the user’s national standards body. A complete listing of these bodies can be found at http://www.iso.org/members.html.

This second edition cancels and replaces the first edition (ISO 22000:2005), which has been technically revised through the adoption of a revised clause sequence. It also incorporates the Technical Corrigendum ISO 22000:2005/Cor.1:2006.

The following annexes are included to provide the users of this document with further information:

Annex A: cross references between the CODEX HACCP principles and this document;
Annex B: cross reference between this document and ISO 22000:2005.

Introduction

0.1 General

The adoption of a food safety management system (FSMS) is a strategic decision for an organization that can help to improve its overall performance in food safety. The potential benefits to an organization of implementing a FSMS based on this document are:

the ability to consistently provide safe foods and products and services that meet customer and applicable statutory and regulatory requirements;
addressing risks associated with its objectives;
the ability to demonstrate conformity to specified FSMS requirements.

This document employs the process approach (see 0.3), which incorporates the Plan-Do-Check-Act (PDCA) cycle (see 0.3.2) and risk-based thinking (see 0.3.3).

This process approach enables an organization to plan its processes and their interactions.

The PDCA cycle enables an organization to ensure that its processes are adequately resourced and managed, and that opportunities for improvement are determined and acted on.

Risk-based thinking enables an organization to determine the factors that could cause its processes and its FSMS to deviate from the planned results, and to put in place controls to prevent or minimize adverse effects.

In this document, the following verbal forms are used:

“shall” indicates a requirement;
“should” indicates a recommendation;
“may” indicates a permission;
“can” indicates a possibility or a capability.

“NOTES” provide guidance in understanding or clarifying the requirements in this document.

0.2 FSMS principles

Food safety is related to the presence of food safety hazards at the time of consumption (intake by the consumer). Food safety hazards can occur at any stage of the food chain. Therefore, adequate control throughout the food chain is essential. Food safety is ensured through the combined efforts of all the parties in the food chain. This document specifies the requirements for a FSMS that combines the following generally recognized key elements:

interactive communication;
system management;
prerequisite programmes;
hazard analysis and critical control point (HACCP) principles.

In addition, this document is based on the principles that are common to ISO management system standards. The management principles are:

customer focus;
leadership;
engagement of people;
process approach;
improvement;
evidence-based decision making;
relationship management.

0.3 Process approach

0.3.1 General

This document adopts a process approach when developing and implementing a FSMS and improving its effectiveness to enhance production of safe products and services while meeting applicable requirements. Understanding and managing interrelated processes as a system contributes to the organization’s effectiveness and efficiency in achieving its intended results. The process approach involves the systematic definition and management of processes, and their interactions, so as to achieve the intended results in accordance with the food safety policy and strategic direction of the organization. Management of the processes and the system as a whole can be achieved using the PDCA cycle, with an overall focus on risk-based thinking aimed at taking advantage of opportunities and preventing undesirable results.

The recognition of the organization’s role and position within the food chain is essential to ensure effective interactive communication throughout the food chain.

0.3.2 Plan-Do-Check-Act cycle

The PDCA cycle can be described briefly as follows:

In this document, and as illustrated in Figure 1, the process approach uses the concept of the PDCA cycle at two levels. The first covers the overall frame of the FSMS (Clause 4 to Clause 7 and Clause 9 to Clause 10). The other level (operational planning and control) covers the operational processes within the food safety system as described in Clause 8. Communication between the two levels is therefore essential.

0.3.3 Risk-based thinking

0.3.3.1 General

Risk-based thinking is essential for achieving an effective FSMS. In this document, risk-based thinking is addressed on two levels, organizational (see 0.3.3.2) and operational (see 0.3.3.3), which is consistent with the process approach described in 0.3.2.

0.3.3.2 Organizational risk management

Risk is the effect of uncertainty, and any such uncertainty can have positive or negative effects. In the context of organizational risk management, a positive deviation arising from a risk can provide an opportunity, but not all positive effects of risk result in opportunities.

To conform to the requirements of this document, an organization plans and implements actions to address organizational risks (Clause 6). Addressing risks establishes a basis for increasing the effectiveness of the FSMS, achieving improved results and preventing negative effects.

0.3.3.3 Hazard analysis — Operational processes

The concept of risk-based thinking based on the HACCP principles at the operational level is implicit in this document.

The subsequent steps in HACCP can be considered as the necessary measures to prevent hazards or reduce hazards to acceptable levels to ensure food is safe at the time of consumption (Clause 8).

Decisions taken in the application of HACCP should be based on science, free from bias and documented. The documentation should include any key assumptions in the decision-making process.

0.4 Relationship with other management system standards

This document has been developed within the ISO high level structure (HLS). The objective of the HLS is to improve alignment between ISO management system standards. This document enables an organization to use the process approach, coupled with the PDCA cycle and risk-based thinking, to align or integrate its FSMS approach with the requirements of other management systems and supporting standards.

This document is the core principle and framework for FSMSs and sets out the specific FSMS requirements for organizations throughout the food chain. Other guidance related to food safety, specifications and/or requirements specific to food sectors can be used together with this framework.

In addition, ISO has developed a family of associated documents. These include documents for:

prerequisite programmes (ISO/TS 22002 series) for specific sectors of the food chain;
requirements for auditing and certification bodies;
traceability.

ISO also provides guidance documents for organizations on how to implement this document and related standards. Information is available on the ISO website.

1 Scope

This document specifies requirements for a food safety management system (FSMS) to enable an organization that is directly or indirectly involved in the food chain:

to plan, implement, operate, maintain and update a FSMS providing products and services that are safe, in accordance with their intended use;
to demonstrate compliance with applicable statutory and regulatory food safety requirements;
to evaluate and assess mutually agreed customer food safety requirements and to demonstrate conformity with them;
to effectively communicate food safety issues to interested parties within the food chain;
to ensure that the organization conforms to its stated food safety policy;
to demonstrate conformity to relevant interested parties;
to seek certification or registration of its FSMS by an external organization, or make a self-assessment or self-declaration of conformity to this document.

All requirements of this document are generic and are intended to be applicable to all organizations in the food chain, regardless of size and complexity. Organizations that are directly or indirectly involved include, but are not limited to, feed producers, animal food producers, harvesters of wild plants and animals, farmers, producers of ingredients, food manufacturers, retailers, and organizations providing food services, catering services, cleaning and sanitation services, transportation, storage and distribution services, suppliers of equipment, cleaning and disinfectants, packaging materials and other food contact materials.

This document allows any organization, including small and/or less developed organizations (e.g. a small farm, a small packer-distributor, a small retail or food service outlet) to implement externally- developed elements in their FSMS.

Internal and/or external resources can be used to meet the requirements of this document.

2 Normative references

3 Terms and definitions

4 Context of the organization

4.1 Understanding the organization and its context

4.2 Understanding the needs and expectations of interested parties

4.3 Determining the scope of the food safety management system

4.4 Food safety management system

5 Leadership

5.1 Leadership and commitment

5.2 Policy

5.3 Organizational roles, responsibilities and authorities

6 Planning

6.1 Actions to address risks and opportunities

6.2 Objectives of the food safety management system and planning to achieve them

6.3 Planning of changes

7 Support

7.1 Resources

7.2 Competence

7.3 Awareness

7.4 Communication

7.5 Documented information

8 Operation

8.1 Operational planning and control

8.2 Prerequisite programmes (PRPs)

8.3 Traceability system

8.4 Emergency preparedness and response

8.5 Hazard control

8.6 Updating the information specifying the PRPs and the hazard control plan

8.7 Control of monitoring and measuring

8.8 Verification related to PRPs and the hazard control plan

8.9 Control of product and process nonconformities

9 Performance evaluation

9.1 Monitoring, measurement, analysis and evaluation

9.2 Internal audit

9.3 Management review

10 Improvement

10.1 Nonconformity and corrective action

10.2 Continual improvement

10.3 Update of the food safety management system

Bibliography

BS EN ISO 22000:2018+A1:2024

Food safety management systems. Requirements for any organization in the food chain

Current, Under Review

Published:

30 Sep 2024