BS EN 10028 is a series of European standards on flat products made of steel for pressure purposes that discusses the best procedures and specifications on manufacturing high-quality sheets and plates from weldable fine grain steels for the construction of safe pressure equipment. BS EN 10028-5 is the fifth part of a series of documents on flat products made of steel for pressure purposes. BS EN 10028‑5 specifies the requirements for flat products for pressure equipment made of weldable fine grain thermomechanically rolled steels.
The steels are not suitable for hot forming.
NOTE 1: At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available.
If their use at such temperatures is intended the conditions for this should be specially agreed upon between the interested parties.
NOTE 2: Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, the presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume the adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.
BS EN 10028-5 on flat products made of steels for pressure purposes is relevant to:
Fine-grain steels have good cold formability and toughness. They have a fine grain structure due to the low carbon content and micro-alloying elements.
BS EN 10028‑5 navigates you through the tolerances on dimensions, classification and designation, steelmaking process, surface condition, internal soundness, chemical properties, mechanical properties, test methods.
BS EN 10028-5 exemplifies the required chemical composition and mechanical properties that help you achieve precision in terms of product functionality and specification.
As a user of BS EN 10028-5, you can be ensured of all the requirements for flat products made of weldable fine grain steels for pressure purposes. With obedience and compliance to BS EN 10028-5, you can efficiently manufacture high-quality thermomechanically rolled flat products for pressure equipment made of weldable fine grain steels. With BS EN 10028-5 you can be ensured that the products consistently meet and exceed quality assurance targets. BS EN 10028-5 provides you with comprehensive information useful throughout the process of production.
BS EN 10028‑5:2017 supersedes BS EN 10028‑5:2009, which is withdrawn.
The main changes to the previous version EN 10028-5:2009 are listed below:
EN 10028-5:2017