BS EN 61755-3-2 is a part of an international multi-series standard that focuses on fibre optic connector optical interfaces.
BS EN 61755-3-2 defines certain dimensional limits of a 2.5 mm and a 1.25mm diameter cylindrical zirconia (ZrO2) 8 degrees angled PC (APC) ferrule optical interface to meet specific requirements for connecting fibre to fibre interconnection.
Note: Ferrules made from the material specified in BS EN 61755-3-2 are suitable for use in categories C, U, E and O.
BS EN 61755-3-2 on PC single-mode fibres is relevant to:
Due to the rapid growth in data and information, fibre optic interconnections are proved to be very useful for clock distribution and communication between different parts of electronic computers. There have been raised demands for wider bandwidth in communication systems and higher performance in IT/NW equipment.
BS EN 61755-3-2 assists you with the optical interface dimensions and the interface parameters for the PC single mode fibres. It helps the users for verifying the performance of an angled-PC polished cylindrical ferrule optical interface by the accuracy with which the optical datum targets of two mating ferrules are aligned with each other. BS EN 61755-3-2 outlines three conditions affecting the alignment of two optical datum targets lateral offset, angular offset, and longitudinal offset. It also discusses the parameters influencing the lateral and angular offset of the optical fibre, and the parameters influencing the axial alignment of the optical fibre axes.
By applying, BS EN 61755-3-2 you can learn about the optical interface, 2.5 mm, and 1.25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled, which can be helpful for your optic fibres business.
EN 61755-3-2:2009
IEC 61755-3-2:2006