This document covers hinged and pivoted steel (any kind) and aluminium based framed, glazed doorsets or openable windows. Throughout this document, the term “doorset” will be used to cover both doorsets and openable windows, unless otherwise stated. It specifies a method for extending the application of test results obtained from fire resistance test(s) conducted in accordance with EN 1634‑1.
Subject to the completion of the appropriate test or tests selected from those identified in Clause 4, the extended application can cover all or some of the following examples:
integrity (E), integrity & radiation (EW) or integrity & insulation (EI1 or EI2), self-closing (C) classification,
door leaf and window leaf,
glazing within the doorset (e.g. for door leaf, side, transom and overpanels),
air transfer devices (e.g. ventilation louvers or air transfer grilles),
side panels, transom panels, flush over panels,
components (e.g. frame and/or suspension system) fixed to the supporting construction (e.g. wall and/or ceiling),
items of building hardware,
decorative and protective finishes,
intumescent strips and intumescent or non-intumescent (e.g. smoke, draught or acoustic) seals,
alternative supporting construction(s).
This document does not cover doorsets installed horizontally (e.g. in a ceiling).
The effect on the classification durability of self-closing for the doorsets following an extended application process is not addressed in this document. The effect on the Classification smoke control for the doorsets following an extended application process is not addressed in this document.
Annex A (normative) provides a thorough list about some of the possible construction parameter variations and the applicability of rules for the extended application of test results.
Annex B (normative) shows different arrangements for doorsets incorporating side and/or over panels.
Annex C (normative) provides with its Figures (from Figure C.1 to C.6) further clarification concerning the suitability of applying EN 15269‑5 (or other parts of EN 15269) depending on the type of doorset for which the extended application of results are intended.
EN 15269-5