1 Scope
NOTE
Bluecoloured text within this document indicates text aligned with CISPR 32. CISPR 32 contains
the appropriate emission requirements above 150 kHz for the equipment within the scope
of this document.
This document applies to multimedia equipment (MME) as defined in 3.1.24 and having a rated AC or DC supply voltage not exceeding 600 V.
MME within the scope of CISPR 20 or CISPR 24 is within the scope of this document.
For MME that falls within the scope of EN 300 386 or any part(s) of EN 301 489 series, the requirements within these product specific/product family standards
take precedence over the requirements within this document.
MME with a broadcast reception function is within the scope of this document, see Annex A. MME with non-broadcast wireless interfaces is also within the scope of this document,
however, compliance with this document does not require the assessment of the performance
of these interfaces.
MME intended primarily for professional use is within the scope of thisdocument.
MME
for whichimmunityrequirements in the frequency range covered by this documentare explicitly formulated in other CISPRdocuments(except CISPR20and CISPR24) are excluded from the scope of thisdocument.
The objectives of this document are:
-
•
to establish requirements which provide an adequate levelof intrinsic immunity so that theMME will operate as intended in its environmentin the frequency range0 kHz to 400 GHz;
-
•
to specify procedures to ensure the reproducibility of tests and the repeatability
of results.
Due to technology convergence of the functions of MME, the performance criteria have been determined on a function-orientated basis rather than on an equipment-orientated basis.