What is BS EN 16713-1 – Filtration system for swimming pools about?

BS EN 16713-1 discusses domestic swimming pools and water systems with a focus on filtration systems and requirements and test methods. BS EN 16713-1 is the first part of the BS EN 16713 multi-series on domestic swimming pools that specifies filtration requirements and test methods of filter elements or media, filtration units, or systems designed to be used in domestic swimming pools. BS EN 16713-1 applies to swimming pools as defined in EN 16582-1 and will be read in conjunction with it.

Note: BS EN 16713-1 does not apply to:

Pools for public use covered by EN 15288-1
Spas for domestic or public use
Paddling pools according to EN 71-8
Pre filtration
Natural and nature like pools

Who is BS EN 16713-1 – Filtration system for swimming pools for?

BS EN 16713-1 on filtration system for swimming pools is useful for:

Architects
Contractors
Installers of aboveground swimming pools equipment
Manufacturers of aboveground swimming pool equipments

Why should you use BS EN 16713-1 – Filtration system for swimming pools?

The filtration system in any swimming pool is there to remove the suspended matter from the pool water. Filtration is achieved by passing the water through a suitable medium contained in a filter body.

It is generally accepted that there are four types of filters associated with swimming pools:

Pre-coat filtration/diatomaceous earth (DE)
Disposable cartridge or filter bag
Graded aggregate (single/multi-layer-filter)
Other filters (e.g., membrane systems)

BS EN 16713-1 discusses filtration requirements, pressure resistance (pressure filter), pressure resistance (negative pressure filter), test methods for filtration efficiency, instructions and operation, harmonized pump curves for the filtration efficiency and retention capacity tests, example of test report verifying the resistance to fatigue caused by cyclic pressure or negative pressure variations, and environmental aspects.

BS EN 16713-1:2016

Domestic swimming pools. Water systems - Filtration systems. Requirements and test methods

Current

Published:

29 Feb 2016