BS EN 61210:2010

What is BS EN 61210- Flat quick-connect terminations about?

BS EN 61210 is a European Standard on connecting devices which applies to non-insulated flat quick-connect terminations consisting of a male tab of size 2,8 mm, 4,8 mm, 6,3 mm or 9,5 mm with hole or dimple detents and a mating female connector for use as either an incorporated or an integrated part of an equipment or of a component, or as a separate entity.

BS EN 61210 establishes uniform requirements for the dimensions, performance characteristics and test program.

The connected electrical copper conductors shall be flexible or rigid stranded, having a cross-sectional area up to and including 6 mm2, or rigid solid having a cross-sectional area up to and including 2,5 mm2.

BS EN 61210 shall not be used for connecting aluminum conductors.

Note 1: This standard, where applicable, may be used for conductors made of material other than copper.

Note 2: For reasons of safety, it is recommended that flat quick-connect terminations beyond the scope of this standard should not be interchangeable with those of this standard.

Note 3: This standard does not apply to female connectors with positive locking means.

Note 4: The flat quick-connect terminations covered by this standard are not intended to be disconnected by pulling on the cable.

NOTE 5 Annex D provides additional information on non-international units.

Who is BS EN 61210- Flat quick-connect terminations for?

BS EN 61210 on connecting devices is relevant to:

• Electrical copper conductor manufacturers
• Flat quick-connect termination manufacturer
• Plug, socket-outlet, coupler manufacturers
• Technical engineers
• Automotive industry
• Quality testing and control authorities

Why should you use BS EN 61210- Flat quick-connect terminations?

Flat quick-connect termination are electrical connections consisting of a male tab and a female connector which can be inserted and withdrawn with or without the use of a tool.

BS EN 61210 provides best industry guidance on characteristics, and constructional requirements, and walks you through types tests to demonstrate conformity of flat quick-connect terminations used for electrical copper conductors.

Maximum permissible temperature based on material coatings, and the force gauge for testing flat quick-connect female connectors is also covered in BS EN 61210.

Overall, BS EN 61210 is your guide on safe and reliable use of flat quick-connect terminations for electrical copper conductors, that can minimize the risk of product failures.