National foreword

This British Standard is the UK implementation of ISO 13007‑2:2013. It supersedes BS ISO 13007‑2:2010 which is withdrawn.

The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling.

A list of organizations represented on this committee can be obtained on request to its secretary.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2013.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.

The committee responsible for this document is ISO/TC 189, Ceramic tile.

This third edition cancels and replaces the second edition (ISO 13007‑2:2010), of which it constitutes a minor revision.

ISO 13007 consists of the following parts, under the general title Ceramic tiles — Grouts and adhesives:

Part 1: Terms, definitions and specifications for adhesives
Part 2: Test methods for adhesives
Part 3: Terms, definitions and specifications for grouts
Part 4: Test methods for grouts

1 Scope

This part of ISO 13007 describes the methods for determining the characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described:

determination of open time (4.1);
determination of slip (4.2);
determination of shear adhesion strength (4.3);
determination of tensile adhesion strength (4.4);
determination of transverse deformation (4.5).

2 Normative references

3 General test conditions and procedures

3.1 Sampling

3.2 Test conditions

3.3 Test materials

3.4 Mixing procedures

3.5 Test substrate

3.6 Failure patterns

3.7 Test report

4 Test methods

4.1 Determination of open time

4.2 Determination of slip

4.3 Determination of shear adhesion strength (D, R)

4.4 Determination of tensile adhesion strength (C)

4.5 Determination of transverse deformation

BS ISO 13007-2:2013

Ceramic tiles. Grouts and adhesives - Test methods for adhesives

Current

Published:

31 Oct 2013