National foreword

This British Standard is the UK implementation of EN ISO 10545‑6:2012. It is identical to ISO 10545‑6:2010. It supersedes BS EN ISO 10545‑6:1997, which is withdrawn.

The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling.

A list of organizations represented on this committee can be obtained on request to its secretary.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 10545‑6 was prepared by Technical Committee ISO/TC 189, Ceramic tile.

This second edition cancels and replaces the first edition (ISO 10545‑6:1995), of which subclause 4.3 has been technically revised.

ISO 10545 consists of the following parts, under the general title Ceramic tiles:

Part 1: Sampling and basis for acceptance
Part 2: Determination of dimensions and surface quality
Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
Part 4: Determination of modulus of rupture and breaking strength
Part 5: Determination of impact resistance by measurement of coefficient of restitution
Part 6: Determination of resistance to deep abrasion for unglazed tiles
Part 7: Determination of resistance to surface abrasion for glazed tiles
Part 8: Determination of linear thermal expansion
Part 9: Determination of resistance to thermal shock
Part 10: Determination of moisture expansion
Part 11: Determination of crazing resistance for glazed tiles
Part 12: Determination of frost resistance
Part 13: Determination of chemical resistance
Part 14: Determination of resistance to stains
Part 15: Determination of lead and cadmium given off by glazed tiles
Part 16: Determination of small colour differences

This European Standard was approved by CEN on 29 January 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Foreword

The text of ISO 10545‑6:2010 has been prepared by Technical Committee ISO/TC 189 “Ceramic tile” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10545‑6:2012 by Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 10545‑6:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 10545‑6:2010 has been approved by CEN as a EN ISO 10545‑6:2012 without any modification.

1 Scope

This part of ISO 10545 specifies a test method for determining the resistance to deep abrasion of all unglazed ceramic tiles used for floor coverings.

2 Normative references

3 Principle

4 Apparatus

4.1

4.2

4.3

5 Test specimens

5.1 Types of test specimen

5.2 Preparation of test specimens

5.3 Number of test specimens

6 Procedure

7 Expression of results

8 Test report

BS EN ISO 10545-6:2012

Ceramic tiles - Determination of resistance to deep abrasion for unglazed tiles

Current, Under Review

Published:

31 Mar 2012