BS EN 10253‑2 is the second part of a series of documents on butt-welding pipe fittings.
BS EN 10253‑2 specifies the technical delivery requirements for seamless and welded butt-welding fittings made of carbon and alloy steel in two test categories which are intended for pressure purposes at room temperature, at low temperature, or elevated temperatures, and for the transmission and distribution of fluids and gases.
BS EN 10253‑2 specifies the type of fittings, type A: Butt-welding fittings with reduced pressure factor, type B: Butt-welding fittings for use at full-service pressure, steel grades and their chemical compositions, mechanical properties, dimensions and tolerances, requirements for inspection, and testing, inspection documents, marking, protection and packaging.
BS EN 10253‑2 on Butt-welding pipe fittings is relevant to:
A butt weld is one of the simplest and most versatile types of weld joint.
BS EN 10253‑2 provides detailed information on welding, finished weld requirement, heat treatment after welding, heat treatment condition, technical requirements, chemical composition, mechanical properties according to temperature, strength impact properties form of fittings.
BS EN 10253‑2 provides guidance to the user to do accurate butt-welding on non-alloy and ferritic alloy steels. Information on the type of inspection, tensile test, weld bend test, impact test, visual testing (VT), Non-destructive testing of the weld is given in BS EN 10253‑2 which helps the user to inspect the weld joint and maintain the quality of the weld. With BS EN 10253‑2 you can be ensured that the products consistently meet and exceed quality assurance targets.
BS EN 10253‑2:2021 supersedes BS EN 10253‑2:2007, which is withdrawn.
The main changes compared to the previous edition are listed below:
EN 10253-2