Foreword

This document (EN 12697‑5:2009) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 12697‑5:2002+A1:2007.

This European Standard is one of a series of standards as listed below:

EN 12697‑1 , Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content

EN 12697‑2 , Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution

EN 12697‑3 , Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary evaporator

EN 12697‑4 , Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery: Fractionating column

EN 12697‑5 , Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the maximum density

EN 12697‑6 , Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens

EN 12697‑7 , Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density of bituminous specimens by gamma rays

EN 12697‑8 , Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void characteristics of bituminous specimens

EN 12697‑9 , Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the reference density

EN 12697‑10 , Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability

EN 12697‑11 , Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the affinity between aggregates and bitumen

EN 12697‑12 , Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water sensitivity of bituminous specimens

EN 12697‑13 , Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement

EN 12697‑14 , Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content

EN 12697‑15 , Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the segregation sensitivity

EN 12697‑16 , Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres

EN 12697‑17 , Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous asphalt specimen

EN 12697‑18 , Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage

EN 12697‑19 , Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen

EN 12697‑20 , Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or Marshall specimen

EN 12697‑21 , Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate specimens

EN 12697‑22 , Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking

EN 12697‑23 , Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirect tensile strength of bituminous specimens

EN 12697‑24 , Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue

EN 12697‑25 , Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test

EN 12697‑26 , Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness

EN 12697‑27 , Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling

EN 12697‑28 , Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for determining binder content, water content and grading

EN 12697‑29 , Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the dimensions of bituminous specimen

EN 12697‑30 , Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by impact compactor

EN 12697‑31 , Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by gyratory compactor

EN 12697‑32 , Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

EN 12697‑33 , Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by roller compactor

EN 12697‑34 , Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test

EN 12697‑35 , Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing

EN 12697‑36 , Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thickness of a bituminous pavement

EN 12697‑37 , Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for HRA

EN 12697‑38 , Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and calibration

EN 12697‑39 , Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition

EN 12697‑40 , Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability

EN 12697‑41 , Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing fluids

EN 12697‑42 , Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of coarse foreign matter in reclaimed asphalt

EN 12697‑43 , Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel

prEN 12697‑44, Bituminous mixtures — Test methods for hot mix asphalt — Part 44: Crack propagation by semi-circular bending test

prEN 12697‑45, Bituminous mixtures — Test methods for hot mix asphalt — Part 45: Saturation Ageing Tensile Stiffness (SATS) Conditioning Test

prEN 12697‑46, Bituminous mixtures — Test methods for hot mix asphalt — Part 46: Low Temperature Cracking and Properties by Uniaxial Tension Tests

prEN 12697‑47, Bituminous mixtures — Test methods for hot mix asphalt — Part 47: Determination of the ash content of lake asphalt

The applicability of this European Standard is described in the product standards for bituminous mixtures.

WARNING The method described in this standard may require the use of dichloromethane (methylene chloride), this solvent is hazardous to health and is subject to occupational limits as detailed in relevant legislation and regulations.

Exposure levels are related to both handling procedures and ventilation provision and it is emphasised that adequate training should be given to staff employed in the usage of these substances.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

BS EN 12697-5:2009

Bituminous mixtures. Test methods for hot mix asphalt - Determination of the maximum density

Published:

28 Feb 2010

Withdrawn:

15 Jan 2019