European foreword

This document (EN 12697‑25:2016) has been prepared by Technical Committee CEN/TC 227“Road materials”, the secretariat of which is held by DIN.

This document supersedes EN 12697‑25:2005.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall be withdrawn at the latest by January 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

Compared with EN 12697‑25:2005 the following changes have been made:

a) addition of uniaxial compression test with confinement for mastic asphalt;
b) precision of friction-reducing system for loading surfaces;
c) definition of loading signal for triaxial tests by identifying loading time and rest time, to be considered in EN 13108‑20;
d) implementation of digit numbers for test results;
e) clarification of formulae and definitions.

This European standard is one of a series of standards as listed below:

— EN 12697‑1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content
— EN 12697‑2, Bituminous mixtures — Test methods — Part 2: Determination of particle size distribution
— EN 12697‑3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary evaporator
— EN 12697‑4, Bituminous mixtures — Test methods — Part 4: Bitumen recovery: Fractionating column
— EN 12697‑5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the maximum density
— EN 12697‑6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens
— EN 12697‑7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density of bituminous specimens by gamma rays
— EN 12697‑8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void characteristics of bituminous specimens
— EN 12697‑10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability
— EN 12697‑11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the affinity between aggregate and bitumen
— EN 12697‑12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water sensitivity of bituminous specimens
— EN 12697‑13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement
— EN 12697‑14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content
— EN 12697‑15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the segregation sensitivity
— EN 12697‑16, Bituminous mixtures — Test methods — Part 16: Abrasion by studded tyres
— EN 12697‑17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous asphalt specimen
— EN 12697‑18, Bituminous mixtures — Test methods — Part 18: Binder drainage
— EN 12697‑19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen
— EN 12697‑20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or cylindrical specimens (CY)
— EN 12697‑21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate specimens
— EN 12697‑22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking
— EN 12697‑23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirect tensile strength of bituminous specimens
— EN 12697‑24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue
— EN 12697‑25, Bituminous mixtures — Test methods — Part 25: Cyclic compression test (this document)
— EN 12697‑26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness
— EN 12697‑27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
— EN 12697‑28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for determining binder content, water content and grading
— EN 12697‑29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the dimensions of a bituminous specimen
— EN 12697‑30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by impact compactor
— EN 12697‑31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by gyratory compactor
— EN 12697‑32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous specimens by vibratory compactor
— EN 12697‑33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by roller compactor
— EN 12697‑34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test
— EN 12697‑35, Bituminous mixtures — Test methods — Part 35: Laboratory mixing
— EN 12697‑36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thickness of a bituminous pavement
— EN 12697‑37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
— EN 12697‑38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and calibration
— EN 12697‑39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition
— EN 12697‑40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability
— EN 12697‑41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to deicing fluids
— EN 12697‑42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign matters in reclaimed asphalt
— EN 12697‑43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel
— EN 12697‑44, Bituminous mixtures — Test methods for hot mix asphalt — Part 44: Crack propagation by semi-circular bending test
— EN 12697‑45, Bituminous mixtures — Test methods for hot mix asphalt — Part 45: Saturation ageing tensile stiffness (SATS) conditioning test
— EN 12697‑46, Bituminous mixtures — Test methods for hot mix asphalt — Part 46: Low temperature cracking and properties by uniaxial tension tests
— EN 12697‑47, Bituminous mixtures — Test methods for hot mix asphalt — Part 47: Determination of the ash content of natural asphalts
— prEN 12697‑48, Bituminous mixtures — Test methods — Part 48: Interlayer bonding¹⁾
— EN 12697‑49, Bituminous mixtures — Test methods for hot mix asphalt — Part 49: Determination of friction after polishing
— CEN/TS 12697‑50, Bituminous mixtures — Test methods — Part 50: Resistance to scuffing
— FprCEN/TS 12697‑51, Bituminous mixtures — Test methods — Part 51: Surface shear strength test²⁾
— prCEN/TS 12697‑52, Bituminous mixtures — Test methods — Part 52: Conditioning to address oxidative ageing³⁾
— prEN 12697‑53, Bituminous mixtures — Test methods — Part 53: Cohesion increase by spreadabilitymeter method¹⁾

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

BS EN 12697-25:2016

Bituminous mixtures. Test methods - Cyclic compression test

Current, Under Review

Published:

31 Aug 2016