• for use in, on, or in association with equipment for household appliance and similar use;

• for building automation within the scope of ISO 16484 series and IEC 63044 series (HBES/BACS);

• for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications;

• that are smart enabled;

• that are AC or DC powered electric actuators with a rated voltage not exceeding 690 V AC or 600 V DC;

• used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof;

• utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs;

• using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J;

• that are mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof;

• as well as manual controls when such are electrically and/or mechanically integral with automatic controls.

• apply to automatic electric actuators intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate automatic electric actuators intended specifically for industrial applications in cases where no relevant safety standard exists;

• take into account the response value of an automatic action of an electric actuator, if such a response value is dependent upon the method of mounting the electric actuator in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer will apply;

• address the integrity of the output signal to the network devices, such as interoperability with other devices unless it has been evaluated as part of the control system;

• apply to electric actuators which are mechanically integrated with valves covered by a separate part 2 (e.g. IEC 60730‑2‑8);

• apply to electric motors, requirements for which are contained in IEC 60034.