BS EN 4612‑002 specifies the characteristics of UV laser printable jacket, tin-plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene copolymer (XLETFE) family for use in the onboard electrical systems of aircraft operating at temperatures between – 65 °C and 135 °C at 600 V RMS at sea level.
This insulation system has been used in aerospace applications using 115 V (phase-to neutral) 400 Hz ac and 28 Vdc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user.
These jacketed cables are suitable for airframe use without additional protection when the jacket is present. When the jacket is stripped back the cores may need additional protection.
Note: In case of conflict between BS EN 4612‑002 and other referenced documents, the requirements of this standard shall take precedence.
BS EN 4612‑002 on Jacketed or screened and jacketed cables is useful for:
BS EN 4612‑002 provides requirements for materials and construction for jacketed cables, which helps you ensure that the jacketed insulation cables will withstand high temperature.
BS EN 4612‑002 also provides the color coding for the jackets so that the purchaser can know which jacket should be purchased as per the need.
BS EN 4612‑002 helps verify the suitability of cables for use in other electrical systems.
Note: The manufacturer has to make identifications and markings in accordance with EN 2084.
EN 4612-002