National foreword

This British Standard reproduces verbatim ISO 4587:2003 and implements it as the UK national standard.

The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives, which has the responsibility to:

aid enquirers to understand the text;
present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;
monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this committee can be obtained on request to its secretary.

ISO 4587:2003 supersedes ISO 4587:1995, which was never adopted as a British Standard.

Cross-references

The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.

This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.

Compliance with a British Standard does not of itself confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 2 July 2003

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 4587 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.

This third edition cancels and replaces the second edition (ISO 4587:1995), which has been technically revised.

1 Scope

This International Standard specifies a method for determining the tensile lap-shear strength of rigid-to-rigid bonded assemblies using a standard specimen under specified conditions of preparation and testing. This test procedure does not provide design information.

2 Normative references

3 Principle

4 Apparatus

4.1

5 Specimens

5.1

5.2

5.3

5.4

5.5

6 Conditioning

7 Procedure

8 Expression of results

9 Precision

10 Test report

BS ISO 4587:2003

Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

Current

Published:

2 Jul 2003