BS IEC 62629‑12‑2 is the 12th part of the international standard used for 3D display devices.
BS IEC 62629‑12‑2 specifies the measuring methods of motion artifacts for stereoscopic displays using glasses. BS IEC 62629‑12‑2 is applicable to stereoscopic displays using glasses, which consist of transmissive type active-matrix liquid crystal display modules (without post image processing).
Note: Motion blur measurement methods and analysis methods introduced in this document are not universal tools for all different LCD motion enhancement technologies due to their complexity and displays with some motion quality enhancement technologies cannot be measured or analyzed by the methods introduced in this document. If this is the case, users are made aware of this.
BS IEC 62629‑12‑2 on measuring methods of stereoscopic displays using glasses is useful for:
The stereoscope is a device used for viewing pairs of photographs as a three-dimensional image. These photographs can be viewed with glasses that helps in reducing the motion blur image.
BS IEC 62629‑12‑2 helps in measuring the standard motion-blur which helps in improving the image quality of the 3D display devices. This includes two measuring methods that are direct and indirect motion blur methods. These standard measuring conditions specified in BS IEC 62629‑12‑2 is useful for measuring motion artifacts in different climatic conditions. This test method helps in sustaining the 3D display devices in the different climatic conditions.
BS IEC 62629‑12‑2 can assist you in measuring the motion artifacts for stereoscopic displays using glasses. This measuring method helps in improving the image quality of 3D display devices. With the help of BS IEC 62629‑12‑2, you can manufacture good quality 3d display devices.
IEC 62629-12-2 Ed1.0