Materials testing is a very important aspect of safety and material strength and can mean the success or failure of a product.

This is particularly important in structural engineering where the calculations must be accurate for building solid and safe constructions. Alternatively, the aerospace industry also demands rigorous measurement for metallic components used in aeronautical engineering.

Therefore, having a manufacturing standard in place that adds confidence to the process, is essential.

BS EN ISO 6892-1:2019 Metallic materials. Tensile testing. Method of test at room temperature is part of the BS EN ISO 6892 series which brings together the European and international methods of testing metallic materials at ambient conditions.

BS EN ISO 6892-1 was developed using a consensus-based collaborative approach with input from experts from the materials, special metals testing and quality management industries. Such organizations as British Civil Engineering Manufacturers Association, GAMBICA Association Limited, National Physical Laboratory (NPL), UKAS (United Kingdom Accreditation Service) and University of Warwick contributed to the process.

What does Tensile Testing Standard BS EN ISO 6892-1 Specify?

In 2009, BS EN ISO 6892-1 introduced Method A, the method of test control based on maintaining a strain rate. The more traditional method, now referenced as Method B, is based on maintaining a stress rate during the elastic region of a tensile test. However there has been confusion around Method A and how the strain rate is measured whether it can be done using a closed loop method or a crosshead separation.

As such BS EN ISO 6892-1:2019 includes additional separation of methods, introducing Method A1 (Closed-Loop Strain Control) and Method A2 (Constant Crosshead Separation Rate).

BS EN ISO 6892-1 can test metallic sheets and plates, wire, bar or section, rebar, and tubes. Specimens are gripped securely ensuring axial alignment for minimal bending and the specimen is strained in tension until failure using either Method A or Method B control modes. During this time, the load, crosshead extension, time, and strain data are recorded to determine the material characteristics.

As Method A is the recommended method of control, the goal is that this further clarification will assist with test labs that are transitioning from Method B towards Method A and monitoring the specimen strain rate.

To learn about the use of advanced materials in manufacturing, click here.

The Benefits of Adopting Tensile Testing Standard BS EN ISO 6892-1:2016

Method A can help minimize the variation of the test rates during the moment when strain-rate sensitive parameters are determined and minimize the measurement uncertainty of the test results:

• Allows more repeatable and comparable results to be produced

• When utilizing Method A1, there can be considerable time savings

• Makes recommendations for computer-controlled testing machines

BS EN ISO 6892-1 enables designers and engineers of metallic products and components, specifiers, and the insurance industry to define the mechanical properties of metallic materials at room temperature. It can also be a useful reference for major fabrication contracts between manufacturers and customers.

In your quality-critical industry, our tailored BSI Knowledge subscription service puts the control in your hands, with traceability to monitor and demonstrate your business's access to standards. Build your own custom collection of standards, or opt for access to our GBM41 Metal Products module and keep up-to-date with any relevant changes to your standards strategy. Request to learn more.

Add BS EN ISO 6892-1 to your collection today.