National foreword

This British Standard is the UK implementation of ISO 20812:2026.

The UK participation in its preparation was entrusted to Technical Committee B/540/8, Mirror committee for ISO/TC 163 - Thermal Performance and Energy use in the built Environment.

A list of organizations represented on this committee can be obtained on request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2026.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 3, Thermal insulation products, components and systems.

Any feedback or questions on this document should be directed to the user’s national standards body. A complete listing of these bodies can be found at www.iso.org/members.html.

1 Scope

This document specifies the requirements and test methods for factory-made cellular glass products which are used for thermal insulation of buildings. The products are manufactured in the form of slabs, faced or unfaced boards, and one-sided blocks.

Products covered by this document are also used in prefabricated thermal insulation systems and composite panels. The performance of systems incorporating these products is not covered.

This document describes product characteristics and test methods, designation code, marking and labelling.

This document does not apply to:

products with a declared thermal conductivity greater than 0,056 W/(m K) at 25 °C;
products for the insulation for the building equipment and industrial installations.

This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. Specific requirements agreed between the purchaser and the supplier, e.g. type, dimensions and forms, regulatory compliance and inspection requirements or certification requirements are outside the scope of this document.

2 Normative references

3 Terms and definitions

4 Symbols and abbreviated terms

4.1

5 Characteristics

5.1 General

5.2 Thermal conductivity

5.3 Compression strength

5.4 Dimensions

5.5 Bending strength

5.6 Point load

5.7 Tensile strength perpendicular to faces

5.8 Dimensional stability

5.9 Short-term water absorption

5.10 Long-term water absorption

5.11 Water vapour transmission

5.12 Fire behaviour

5.13 Apparent density

6 Test methods

6.1 Sampling

6.2 Conditioning

6.3 Testing

7 Designation code

8 Marking and labelling

BS ISO 20812:2026

Thermal insulation products for buildings — Cellular glass products — Specification

Current

Published:

31 Jan 2026