National foreword

This British Standard is the UK implementation of ISO 23019:2022.

The UK participation in its preparation was entrusted to Technical Committee RAE/1, Railway Applications.

A list of organizations represented on this committee can be obtained on request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2022.

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 269, Railway applications, Subcommittee SC 3, Operations and services.

Any feedback or questions on this document should be directed to the user’s national standards body. A complete listing of these bodies can be found at www.iso.org/members.html.

Introduction

The construction of new railway lines is carried out all over the world. For the operation of new railway lines, advanced cultivation/education of a driver’s skill is necessary. Even for existing railway lines, cultivation/education of a new driver’s skill and his/her sustained re-skilling are also necessary. Intrinsically, cultivation/education of vehicle crew/staff (e.g. the driver, conductor) is important to ensure safety and stability of rail transport. This is because it can bring about accident prevention and reduce the effects of abnormal working conditions (e.g. an unexpected accident, breakdown of a train and its components). Since the driving simulator can easily reproduce these abnormal working conditions, it can lead to the improvement of driving techniques and effective crew/staff training. Therefore, the introduction of the driving simulator device becomes indispensable in the field of driver training, which has very high needs and demands.

For that reason, this document has been developed to:

define the common terminologies;
support the creation of specifications for international procurement (e.g. to avoid the possibility of applying too many specifications that can lead to a remarkable rise in price depending on the purpose of use of the simulator);
define what is necessary for the performance of the driving simulator depending on the training purposes to ensure that appropriate and most efficient driver training is carried out.

This document covers these needs and, as a result, contributes to the further development of the railway industry.

This document will help customers by giving them a clear vision of the minimum functions and performances required for a simulator. Thus, it can help them to define their real needs.

1 Scope

This document specifies requirements for railway driving simulators for drivers' training. It defines the minimum functions and performances for a driver training simulator.

This document is applicable to all guided transport systems, including for mainlines, metros, tramways and light rails, as part of public/private transport systems. These vehicles are intended for the operation of intercity, urban and suburban passenger or freight services with self-propelled systems and operated on either segregated or not segregated paths.

Annexes A to D provide additional information.

2 Normative references

3 Terms and definitions

3.1 General

3.2 Actors

3.3 Training functions and training states

3.4 Simulated items

3.5 Visual characteristics and functions

3.6 Simulator items

4 Conceptual considerations for simulator

4.1 General

4.2 Purpose of simulator

4.3 Classification of simulators

4.4 Simulator operating modes

4.5 Simulated guided transport system and environment

5 Required functions and performance for training mode

5.1 General

5.2 Simulated guided transport system and environment

5.3 Perception

5.4 Control and monitor including training scenario

6 Required functions and performance for supporting mode

6.1 General

6.2 Training administration (training scenario editor, line editor, others)

6.3 Maintenance administration

7 Required functions and performance for computer system and auxiliary simulator equipment

7.1 General

7.2 Computer system

7.3 Interfaces

7.4 Auxiliary simulator equipment

8 Requirements for simulator installation

8.1 General

8.2 Minimum requirements

8.3 Best practice options

9 Maintainability

9.1 General

9.2 Minimum requirements

9.3 Best practice options

10 Data and documents for simulation

10.1 General

10.2 Minimum requirements

10.3 Best practice options

BS ISO 23019:2022

Railway Applications. Driving simulator for drivers' training

Current

Published:

31 Aug 2022