National foreword

This British Standard is the UK implementation of EN 352‑8:2020+A1:2024. It supersedes BS EN 352‑8:2020, which is withdrawn.

The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .

The UK participation in its preparation was entrusted to Technical Committee PH/7, Hearing protectors.

A list of organizations represented on this committee can be obtained on request to its committee manager.

Contractual and legal considerations

This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law.

This publication is provided as is, and is to be used at the recipient’s own risk.

The recipient is advised to consider seeking professional guidance with respect to its use of this publication.

This publication is not intended to constitute a contract. Users are responsible for its correct application.

This publication has been prepared under a mandate given to the European Standards Organizations by the European Commission and the European Free Trade Association. It is intended to support requirements of the EU legislation detailed in the European Foreword. A European Annex, usually Annex ZA or ZZ, describes how this publication relates to that EU legislation.

For the Great Britain market (England, Scotland and Wales), if UK Government has designated this publication for conformity with UKCA marking (or similar) legislation, it may contain an additional National Annex. Where such a National Annex exists, it shows the correlation between this publication and the relevant UK legislation. If there is no National Annex of this kind, the relevant Annex ZA or ZZ in the body of the European text will indicate the relationship to UK regulation applicable in Great Britain. References to EU legislation may need to be read in accordance with the UK designation and the applicable UK law. Further information on designated standards can be found at

www.bsigroup.com/standardsandregulation.

For the Northern Ireland market, UK law will continue to implement relevant EU law subject to periodic confirmation. Therefore Annex ZA/ZZ in the European text, and references to EU legislation, are still valid for this market.

UK Government is responsible for legislation. For information on legislation and policies relating to that legislation, consult the relevant pages of www.gov.uk.

Compliance with a British Standard cannot confer immunity from legal obligations.

This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2020.

This European Standard was approved by CEN on 18 June 2018 and includes Amendment 0 approved by CEN on 27 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.

European foreword

This document (EN 352‑8:2020+A1:2024) has been prepared by Technical Committee CEN/TC 159 “Hearing protectors”, the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall be withdrawn at the latest by April 2027.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document includes Amendment 1 approved by CEN on 27 February 2024.

This document supersedes EN 352‑8:2020.

The start and finish of text introduced or altered by amendment is indicated in the text by tags .

This document has been prepared under a standardization request given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation(s).

For relationship with EU Regulation(s), see informative Annex ZA, which is an integral part of this document.

deleted text

Any feedback and questions on this document should be directed to the users’ national standards body. A complete listing of these bodies can be found on the CEN website.

According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.

Introduction

The requirements of this standard are concerned with the entertainment audio performance of the earmuffs.

EN 352‑8 is part of a family of standards describing product requirements:

EN 352‑1, Hearing protectors — General requirements — Part 1: Earmuffs
EN 352‑2, Hearing protectors — General requirements — Part 2: Earplugs
EN 352‑3, Hearing protectors — General requirements — Part 3: Earmuffs attached to head protection and/or face protection devices
EN 352‑4, Hearing protectors — Safety requirements — Part 4: Level-dependent earmuffs
EN 352‑5, Hearing protectors — Safety requirements — Part 5: Active noise reduction earmuffs
EN 352‑6, Hearing protectors — Safety requirements — Part 6: Earmuffs with safety-related audio input
EN 352‑7, Hearing protectors — Safety requirements — Part 7: Level-dependent earplugs
EN 352‑8, Hearing protectors — Safety requirements — Part 8: Entertainment audio earmuffs
EN 352‑9, Hearing protectors — Safety requirements — Part 9: Earplugs with safety-related audio input
EN 352‑10, Hearing protectors — Safety requirements — Part 10: Entertainment audio earplugs

Test methods for these requirements are described in the following standards:

EN 13819‑1, Hearing protectors — Testing — Part 1: Physical test methods
EN 13819‑2, Hearing protectors — Testing — Part 2: Acoustic test methods
EN 13819‑3, Hearing protectors — Testing — Part 3: Supplementary acoustic test methods

An associated standard EN 458 covers selection, use, care and maintenance of hearing protection.

1 Scope

This document is applicable to entertainment audio earmuffs. It specifies requirements on construction, design, performance, marking and user information relating to the inclusion of the entertainment audio facility.

Entertainment audio earmuffs use a wired or wireless system through which audio entertainment can be relayed. They may incorporate a radio receiver set or music player for entertainment or allow audio input from external devices.

They also offer the possibility to communicate warning signals or messages. The product standards impose a limitation on the reproduced sound pressure level at the ear.

The entertainment audio signal can be transmitted by radio (broadcast or local plant programmes) or by wire or other communication like Bluetooth.

2 Normative references

3 Terms and definitions

4 Requirements

4.1 General

4.2 Performance

5 Marking

6 Manufacturer's instructions and information

Bibliography

BS EN 352-8:2020+A1:2024

Hearing protectors. Safety requirements - Entertainment audio earmuffs

Current

Published:

30 Apr 2024